Intrinsic muscle dysfunction can be devastating. Patients often have difficulty using the affected hand for most daily activities. Physicians, occupational therapists, and patients have to work together to enable the patient to regain functional use of the hand to perform activities that are a part of their life roles. Occupational therapists play an important role in the rehabilitation process to regain motion, strength, and dexterity so that patients can use the hand more functionally. Patient education and active participation in their therapy is also essential in the functional recovery of the hand.

[1] Dai Ling, Zhang Qin, & Yin Xianming. Application of auxiliary therapeutic gloves in hand functional rehabilitation. The 10th National Exercise Therapy Conference of China Rehabilitation Medical Association and the "5.12" International Forum on rehabilitation medicine

the combined use of massage and joint loosening, occupational therapy and wearing self-developed auxiliary treatment gloves can significantly increase the active and passive joint range of flexion of fingers; Wearing auxiliary treatment gloves may independently increase the range of joint movement of finger flexion, especially the passive range of joint movement; The auxiliary treatment gloves have the advantages of simple manufacture, low cost, safe and convenient use, and have potential clinical popularization value

The bellow device is Highly recommended by Doctors and Physiotherapists

Passive-Grip/Release-training

Hospital, as an important guardian of people’s life and health, its internal facilities, especially the design and function of beds, are directly related to the treatment effect and rehabilitation experience of patients. With the progress of medical science and technology, the hospital bed has developed from the initial simple rest tool into a multi-functional medical equipment integrating treatment, nursing and rehabilitation. This article will detail the types of beds commonly found in hospitals to help you better understand this important medical facility.



1. Ordinary hospital beds

Ordinary beds are the most common type of beds in hospitals, mainly used to provide patients with a comfortable rest environment. It is usually composed of bed frame, mattress, headboard, bed end board and casters. The bed frame has the function of adjustable height and Angle to adapt to the needs of different patients. The mattress is made of soft and comfortable materials to ensure a good quality of sleep for patients.



2. Intensive care beds

Intensive care beds (ICU beds) are primarily used to treat critically ill patients. Such beds are equipped with advanced vital signs monitoring equipment, such as ventilators, blood pressure monitors, electrocardiogram monitors, etc., so that medical staff can grasp the vital signs of patients in real time. In addition, intensive care beds are highly adjustable to meet the needs of patients in different positions, which is conducive to treatment and care.



3. Surgical beds

The operating bed is the core equipment in the operating room. It has a precise adjustment function, which can easily adjust the height, Angle and inclination to meet the needs of surgical operations. The operating bed also has good stability and load-bearing capacity to ensure the safety of the operation.



4. Delivery beds

The delivery bed is a special equipment in the delivery room. It provides comfortable support and a stable environment for women to give birth. Delivery beds usually have an adjustable head and tail to accommodate the needs of different stages of labor. In addition, some advanced childbirth beds are also equipped with childbirth assistance equipment, such as childbirth balls, childbirth benches, etc., to improve the comfort and safety of childbirth.

5. Hospital beds for children

Children's beds are beds designed for children. It is tailored to a child's height, weight and physiological characteristics to ensure the best comfort and safety during treatment. Children's beds usually have a cute appearance and rich colors to alleviate children's fear of hospitals.

6. Multi-functional medical bed
With the continuous development of medical technology, multi-functional medical beds have gradually become a new favorite in hospitals. These beds integrate advanced features such as wave massage, bedsore prevention, heart chair, manual and electric CPR. Multifunctional medical beds not only improve the comfort and safety of patients, but also simplify the work flow of medical staff and improve medical efficiency.

7. Electric bed
The electric bed realizes the functions of lifting, tilting and rotating the bed body through the electric motor. It has the advantages of simple operation, accurate adjustment and good stability. Electric beds are usually equipped with a remote control or touch screen, so that patients and medical staff can adjust the position and Angle of the bed at any time.

8. Special purpose beds
In addition to the above common types, the hospital also has some special purpose beds, such as burn beds, rehabilitation beds, dialysis beds, etc. These beds are tailored to the specific needs of patients to meet the needs of different treatment scenarios.

There are many types of hospital beds, each of which carries a deep concern for the health and safety of patients. With the continuous progress and innovation of medical technology, the design and function of future beds will be more humane, intelligent and diversified, providing patients with more comfortable, safe and efficient medical services. Xiamen Weiyou Intelligent Technology Co., Ltd. is a full-service provider specializing in rehabilitation therapy, healthcare equipment and massage products. In the field of medical beds, the company has launched a number of innovative products, such as anti-bedsore medical beds, intelligent patient transfer beds, multi-functional electric medical beds, etc., to meet the needs of different medical scenarios. If you want to know more details about the hospital bed, please feel free to contact us at sales@weiuit.com!

In People’s Daily life, the bed is one of the indispensable furniture. It is not only a place for us to rest and sleep, but also a vital device in the process of medical treatment and rehabilitation. There are significant differences in design and function between hospital beds and home beds, which are designed to meet the needs of use in different scenarios. At the same time, this paper will briefly introduce the innovation achievements of Xiamen Weiyou Intelligent Technology Co., Ltd. in the field of medical beds.



Hospital beds, often referred to as medical beds, are designed with a greater focus on functionality and durability. Medical beds usually use metal frames and easy-to-clean materials, the color is relatively simple, mainly white and gray, such a design is convenient for medical staff to carry out daily cleaning and disinfection work, but also in line with the overall environment of the hospital. In terms of function, the medical bed is equipped with a variety of adjustment functions, such as the independent adjustment of the back, legs, bed height and multiple parts, as well as the mattress pressure adjustment function, which is designed to meet the needs of various operations in the medical process, to facilitate the care and treatment of medical staff. In addition, medical beds are equipped with safety devices such as strong side guardrails and emergency braking systems to ensure the safety of patients during treatment and care.



In contrast, the family bed is more focused on beauty and comfort. Home beds are usually made of wood or soft materials, and are designed in a variety of styles, which can be personalized according to the home environment. In terms of function, family beds usually only have basic lifting and Angle adjustment functions to meet the needs of daily care and sleep. The design of the family bed pays more attention to the simplicity and comfort of operation to provide a warm family atmosphere and a good sleep experience.



It is worth mentioning that Xiamen Weiyou Intelligent Technology Co., Ltd. has achieved remarkable results in the field of medical beds. As a research and development enterprise focusing on rehabilitation medical equipment and device, Xiamen Weiyou Intelligent Technology Co., Ltd. is committed to providing high-quality and reliable medical bed products. Its medical bed products not only have all the basic functions of medical beds, but also integrate advanced intelligent technology, such as electric push rod, chip control, etc., which makes the medical staff more convenient and efficient in the operation process. At the same time, the medical bed products of XiamenWei Intelligent Technology Co., Ltd. also pay attention to comfort and safety design, such as the use of ergonomic mattresses and pillows, equipped with non-slip mattresses and emergency braking systems to ensure the comfort and safety of patients in the treatment process.



To sum up, there are significant differences in design and function between hospital beds and home beds. Medical beds focus on functionality and durability to meet the needs of medical processes; Family beds pay more attention to aesthetics and comfort to provide a good sleep experience. Xiamen Weiyou Intelligent Technology Co., Ltd. as a leader in the field of medical beds, with its advanced technology and high-quality products to provide users with more diversified choices. In the future, with the continuous progress of medical technology and the improvement of people’s health awareness, it is believed that the design and function of medical beds and family beds will be more perfect and innovative.

In the medical field, heat and cold therapy, as an ancient and effective means of treatment, is widely used in the treatment of various diseases and injuries. It uses temperature changes to affect the body’s blood circulation, nerve conduction and tissue metabolism to achieve pain relief, reduce inflammation, promote healing and other purposes. This paper will introduce the purpose of cold and heat therapy in detail, and briefly introduce a modern treatment equipment-cold and heat compression therapy machine.





The purpose of cold therapy

Reduce local congestion or bleeding: Cold therapy through a substance below the temperature of the human body, directly acting on the skin tissue, so that the epidermal blood vessels contraction, avoid capillary dilation and rupture, thereby improving vascular congestion and bleeding and other symptoms. This is especially effective for acute soft tissue injuries, nose bleeding and other conditions.

Reduce pain: Cold therapy can reduce the skin temperature, slow down the nerve conduction speed, reduce the transmission of painful nerve impulses, and thus reduce the sense of pain to a certain extent. It is often used for toothache, burn and other pain treatment.

Control the spread of inflammation: Cold therapy can slow blood flow, reduce cell metabolism and microbial activity, and help control the spread of inflammation. This is an important treatment for patients in the early stages of inflammation.

Hypothermia: Cold therapy lowers body temperature through direct contact with the skin, using physical effects such as conduction and evaporation. It is often used in the treatment of patients with high fever, heat stroke, etc., and can also be used for local or systemic cooling of patients with brain trauma and brain hypoxia to reduce brain cell metabolism and oxygen demand.



The purpose of heat therapy

Promote the dissipation of inflammation: Heat therapy acts on the skin tissue through heat higher than the skin surface temperature, so that the inflammatory exudate is quickly absorbed and dissipated, which is conducive to dissolving the necrotic tissue and promoting tissue repair.

Reduce pain: heat therapy can accelerate the absorption of pathogenic tissues and inflammatory exudates, relieve the stimulation and pressure of nerve endings, reduce the excitability of pain nerves, thereby reducing the sense of pain. It has a better relief effect on the pain caused by mild to moderate muscle soreness and arthritis.

Reduce deep tissue congestion: Heat therapy can speed up blood circulation, reduce blood viscosity, and cause blood vessels to dilate, thereby reducing the symptoms of deep tissue congestion.

Warm and comfortable: Heat therapy by heat action on the skin tissue, so that blood vessels in a state of dilation and accelerated blood circulation, increase blood volume, increase skin temperature, improve skin discomfort and cold feeling.



Introduction to hot and cold compression therapy machines

The hot and cold compression therapy machine is a modern medical equipment that combines the functions of cold compress and hot compress, as well as pressure technology. It is usually composed of two parts of the main engine and peripheral accessories, the main engine includes the refrigeration system, the temperature control system and the water circulation control system, the peripheral accessories include the thermal insulation hose and the special protection of the hydrofoil in each part.



This device provides a cold source or heat source through a semiconductor refrigeration system, cools or heats the water in the tank to the clinically required water temperature, and then outputs it to the water sac through the water circulation system. The water sac is in contact with the patient’s body and uses the water cycle to take away heat or provide heat to achieve local cooling or heating effect. At the same time, the device also has a pressurization function, which can promote blood circulation and lymphatic return through pressure, further accelerating the dissipation of inflammation and wound healing.



The cold and heat compression therapy machine has the advantages of simple operation, controllable temperature, adjustable pressure, etc., which is suitable for the treatment of various diseases and injuries. It can be used not only for the treatment of acute soft tissue injury, joint fracture before and after surgery, but also for the treatment of patients with degenerative osteoarthropathy, hemophilia acute joint swelling stage, etc. In addition, the device is also widely used in rehabilitation training, for patients with joint swelling pain, fever has a significant effect.



In short, heat and cold therapy, as a simple and effective means of treatment, plays an important role in the medical field. The cold and heat compression treatment machine, as a modern application equipment for cold and heat therapy, provides patients with more convenient and efficient treatment options.

what's the advantage of the patient lateral moving transfer beds?

Patient lateral moving beds, also known as "air transfer systems," offer several advantages for both patients and healthcare providers, including:

1. Reduced risk of injury: Patient lateral moving beds reduce the risk of injury during patient transfers and repositioning. This is particularly important for patients with limited mobility or those who are at risk of developing pressure ulcers.

2. Improved patient comfort: Lateral moving beds help to distribute pressure evenly across the patient's body, reducing the risk of pressure ulcers and improving patient comfort.

3. Increased efficiency: With lateral moving beds, healthcare providers can transfer patients more quickly and easily, reducing the amount of time and effort required for patient transfers.

4. Reduced staff injuries: Lateral moving beds reduce the risk of injury to healthcare providers during patient transfers, which can result in reduced workers' compensation claims and improved staff morale.

5. Enhanced infection control: Lateral moving beds can be easily cleaned and disinfected, which helps to reduce the risk of infection transmission between patients.

Overall, patient lateral moving beds offer a safe, efficient, and comfortable way to transfer and reposition patients, which can improve patient outcomes and enhance the overall quality of care.

How to apply theme IP to water parks?

Intellectual property theme, such as animation, comics, movies etc, including characters, scenes, stories are used more and more in design, facilities, activities, and other aspects in water parks. There are well known similar theme parks in the world, such as Disneyland and Universal parks. A good IP theme will make water park unique, fascinating, compelling and unforgettable, but how to apply the IP theme to water parks?

Columbia Pictures' Aquaverse

After Sony Pictures and Thailand resort developer Amazon Falls decided to build world's first Sony Columbia Pictures theme water park in Pattaya, Thailand, they integrated Sony Pictures classic movie element to 8 immersive movie playing areas including “Ghostbusters”, ”Jumanji”, “ Bad Boy”, “ Zombieland”, “The Emoji Movie”‌, “Surf's Up”‌‌ and “ ‌ Hotel Transylvania” etc, to make tourists immerse themselves in the world of movies.

For example, Attractions in the Ghostbusters zone are "Proton Stream", "Slimer Speed Racer" and "Ghost Trap Adventure". Proton Stream features the world’s first "Stay Puft"-themed water dome.

It was an extraordinary idea, also an arduous task to make conceptual design to reality. Firstly, the park need to be decorated according to the design, including games, slides and environment.

And water park tubes and rafts are essential for players to indulge in themed games. This time, they chose Guangdong H-Fun to develop special design tubes and rafts for wave pool floating and water slides. It became a tough challenge to bring these creative drawings to practical products. After trial and error with a few versions in 5 months, extraordinary works were sent to the park for players eventually.

Liakat Dhanji, CEO and chairman of Amazon Falls, said the immersive attractions “marks a phenomenal event for Thai tourism”.“We hope to create a dreamlike destination that brings people’s favorite characters and movies to life and give audiences the extraordinary journey they are unlikely to find elsewhere.” From planner, designer, to architect and manufacturer, people worked together to make dreams come true.

This is not the first time Guangdong H-Fun Provide IP theme customize design service. Before we provided similar special design for Atlantis, OCT Group and Funtawild Group etc. Here are regular procedures:

Like this one for Xi'an Playa Maya Park, one of water parks belong to OCT Group, we confirmed print design on clear tubes with parks according to the theme of Maya civilization, we transfer conceptual design to practical drawing, after sample test and massive production, stunning tubes attracted thousands of players to the park.

Except Xi'an, Guangdong H-Fun also provided similar products to Nanjing, Chongqing, Xiangyang and other water parks belong to OCT group.

Another example Wuhu Fantawild Water Park is a water park belongs to Funtawild Group, which is very welcome to kids for its “Boonie Bears” comics character. We communicated together to apply this element to their unique tube design.

In another park Yingtan Fantawild Water Park, we made new design Inflatable Dome Bouncer Water Slide with water spray to attract kids.

If you have good IP theme for your water park, you can trust Guangdong H-Fun to transfer conceptual design to unique products, which will make your water park much more attractive.

When creating figures for academic papers, the first thing we need to determine is the layout (dimensions) of the images. Designing and drawing on the wrong layout often leads to unnecessary trouble at the final submission stage. Guidelines for image layout requirements are usually clearly stated in the publisher’s Guide for Authors. If not, it's recommended that authors contact the publisher directly—this clarifies the requirements and demonstrates professionalism, attention to detail, and respect for the journal.

Here, we’ll briefly discuss the common layouts used in scientific figures.

Aside from a few specialized journals (such as Science and certain physics publications), most academic journals use a two-column layout. In this context, we focus on two key dimensions: L1 (single-column width) and L2 (double-column width).

When we begin designing and drawing a figure, the first thing to consider and determine is the width of the image—whether to adopt a single-column or double-column layout.As for the height, it can generally be adjusted freely.Below are examples of double-column and single-column layouts.

 

Science is driven by objective facts and rigorous logic; design emphasizes aesthetics and visual storytelling. At SONDII, we combine scientific knowledge with artistic design—offering services in academic illustration, journal cover design, and scientific animation—to transform your ideas into stunning visuals and elevate the impact of your research.

1. Science Is Complex—Design Makes It Visible

Modern scientific research is incredibly complex. From high-throughput sequencing to big data and climate models, the outcomes are often presented through dense graphs and highly technical language. A good designer or illustrator can “translate” this abstract, often overwhelming information into visuals that are intuitive and easy to understand.

Whether it’s a detailed illustration of a cell structure or a dynamic animation of a biological process, visuals often communicate more effectively than pages of text. Whether you're sharing with fellow researchers or engaging the public, design plays an irreplaceable role.

2. Good Design Increases Scientific Impact

In today’s information-saturated world, a striking cover image or infographic can make all the difference in getting your work noticed. More and more scientific journals are recognizing the power of visual communication—not just accuracy in data, but clarity and visual appeal in how it's presented.

Designers can help scientists create visuals that are both logically sound and visually compelling, improving the overall quality of research presentation and outreach.

3. Storytelling Is Key—Design Is the Visual Medium

Effective science communication is about more than just facts—it’s about telling a story. Design is a powerful tool for conveying those stories visually. Whether you're curating an exhibition, posting on social media, or writing a science article, experienced designers can help transform complex processes into emotionally engaging and visually impactful narratives.

 

We offer custom design services for the scientific community, including journal cover design, scientific illustration,and principle-based animations, helping researchers showcase their work with clarity, beauty, and impact.